District energy products

Choose your product with our SSP calculator

Choose now

 

< Back to District energy

Small - District Energy BPHE - 10 to 60 kw 

B8DW

B8DW

The B8DW is our most compact double-wall unit optimized for small to medium capacities, designed for applications requiring leak protection and improved leak detection. The B8DW offers high thermal length suitable for heat recovery and tap water heating where tight temperature approach and low…

E5AS

E5AS

The E5AS, equipped with our patented AsyMatrix® technology, is optimized for hot tap water production in boilers.  Compared with symmetric heat exchangers, the E5AS presents a much lower pressure drop. It is also thermally long, making it particularly suitable for condensing boiler systems. The E5AS…

E8AS

E8AS

The main application for the E8AS is in heating tap water. The E8AS has an optimized asymmetric plate geometry that combines extraordinary thermal efficiency with a low pressure drop. The combination of exceptional efficiency and maximized material utilization makes the E8AS the perfect choice for…

E8LAS

E8LAS

The E8LAS is developed to meet the market’s highest thermal demands for tap water production. The unique construction, with integrated start and end plates, combined with high compactness and efficiency means the E8LAS offers a very versatile solution.

B10T

B10T

The B10T delivers efficient heat exchange solutions across a wide capacity interval, and is quick and simple to adapt for a number of applications. The product’s compact size, versatility, and excellent heat transfer make it a perfect choice for both single-phase and refrigerant applications.

B12

B12

The large-port B12 delivers compact heat transfer solutions for applications with large flows. It is available with different plate patterns to fulfil various thermal duties across a wide range of fluid viscosities and densities. The B12 is an excellent choice for demanding steam and air dryer…

B15T

B15T

The highly efficient B15T has been developed to have maximum thermal length. Precision optimization allows efficient operation even at extremely small temperature differences, making the product the obvious choice for applications demanding high heat flux and improved energy utilization.

 


< Back to District energy

Medium - District Energy BPHE - 60 to 340 kw 

B16

B16

The B16 has been specially designed for one-phase applications, and has been tailored to cover the capacities and specifications of district heating substations, radiator circuits, and tap water heating applications over a wide capacity range. The B16 is also an excellent choice for oil cooling.

B16DW

B16DW

This double-wall product is designed for applications requiring high thermal efficiency, minimal leakage, and improved leak detection. The design offers the same compactness and thermal performance as other SWEP BPHEs.

B85

B85

The B85 is a highly efficient heat exchanger with a higher thermal performance than any comparable product. The B85 is the perfect choice for high-performance condensers and demanding heat transfer requirements. The large ports enable it to cope with high capacities. A smaller pressing depth,…

B86

B86

The B86 is a highly efficient heat exchanger with higher thermal length than previous generations. It is a perfect choice for high efficient tap water heating and premium condenser applications and offers an optimized heat transfer and reduced hold up volume.

B80AS

B80AS

The B80AS is built on the successful 80 platform and adds the advantages of our patented AsyMatrix® technology to deliver increased thermal performance and reduced pressure drop. The B80AS shares the same physical aspects of the current B80, enabling it to be used as a drop-in improvement in…

B35T

B35T

The B35T is ideal for many applications in district heating, heat recovery for industry, HVAC, combined heat & power and engine oil cooling. It is the perfect choice for efficient heat transfer with a low pressure drop in systems with up to 2½″ piping and 58 m³/h (255 gpm) water flow.

 


< Back to District energy

Large - District Energy BPHE - 340 to 1000 kw 

B120T

B120T

The B120T has been specially developed to operate in demanding heating and industrial applications, typically water-water applications and oil coolers. The product has contributed to the rapid switch to BPHEs from traditional gasket plate heat exchangers and shell-and-tube solutions. It is widely…

B220

B220

B220 is a compact but highly efficient Brazed Plate Heat Exchanger, which offers great heat transfer efficiency at a low cost. One main application is high efficiency tap water heating, but it can also be used in other single-phase applications such as oil cooling, space heating and desuperheaters.…

B250AS

B250AS

Our B250AS is a high-efficiency single-circuit condenser, specially developed for water-cooled chiller and heat pump applications. Its large ports and asymmetric plate design deliver an effective operating range of 80-250 kW. Our AsyMatrix® plate pattern improves heat transfer while reducing water…

B56

B56

The B56 is specially adapted to offer efficient heat transfer in heating and industrial applications. Equipped with our patented AsyMatrix® technology it offers a versatile fit especially for district heating- and oil cooling applications.

DB400

DB400

The DB400 is a highly effective, versatile True Dual condenser which is the perfect choice for flexible chillers and climate control applications. Its advantage is its ability to deliver full performance at both full and half load.

B320HT

B320HT

The NEW B320HT envelope offers efficient solutions for many demanding applications, such as district heating, oil coolers and different industrial applications. This product is part of SWEP’s new range for larger capacities which offers a flexible thermal length through optimizing the plate…

B320LT

B320LT

The NEW B320LT envelope offers efficient solutions for many demanding applications, such as district heating, oil coolers and different industrial applications. This product is part of SWEP’s new range for larger capacities which offers a flexible thermal length through optimizing the plate…

B400T

B400T

The B400T has been developed to work extremely effectively at high capacities, enabling compact solutions in demanding chiller applications.

 


< Back to District energy

Extra Large - District Energy BPHE - 1000 to 10000 kw

B427

B427

The efficient B427 has four different plate types, making it easy to adapt for a wide variety of heating and industrial applications. With 4″ connections it handles up to 156 m³/h (686 gpm) water flow.

B439

B439

The efficient B439 is designed for high heat transfer. It has two plate types, which can also be used together, suitable for a wide range of heating, cooling, and industrial applications. With 4″ connections it handles up to 156 m³/h (686 gpm) water flow.

B65

B65

The B65 is the perfect choice for high-capacity applications where the most robust plate heat exchanger is sought. With different plate combinations, it offers a solution for the most demanding industrial and heating applications, and is also a very effective condenser.

B633

B633

The B633 is a high flow capacity BPHE, suitable for a diverse range of demanding applications, such as condenser and evaporator in power generation, engine oil cooler, steam condenser, heat recovery in chillers, or for specific district heating installations. The product offers PHE-like capacities…

B649

B649

The B649 is ideal for district heating and cooling networks, HVAC, and industrial projects that need an efficient compact BPHE with close temperature approaches at high operating pressures. The big, one-phase B649 delivers PHE-like capacities without the wear and tear of parts. Most of the material…

Choose your product with our SSP calculator

Choose now